Manganese slag can be processed by drying. Generally speaking, how to dry manganese slag? It can be processed by using a dryer. Today, I will share with you the processing process of the manganese slag drying production line.

    Dingli manganese slag dryer is mainly composed of heat source, feeding device, feeding conveyor, rotary drum, discharge conveyor, induced draft fan, dust collector and power distribution cabinet. The working principle of this set of equipment is as follows: due to the viscosity of manganese slag, wet manganese slag enters the drying drum and is divided into the following work areas: one is the guide area, the wet manganese slag enters this area and quickly evaporates water in contact with high temperature hot air, manganese ore When the slag is moved by the guide plate with a large lead angle, it will be led into the next working area if it fails to form a bond; the second is to pick up the cleaning area, where the wet material is picked up by the plate to form a material curtain, and the manganese slag falls down The phenomenon of sticking the drum wall is easy to form. In this area, because the equipment is designed with a cleaning device, the cleaning device can clean the manganese slag adhering to the inner wall very reasonably. In this process, the cleaning device also causes agglomeration of manganese slag pellets. The effect of crushing increases the heat exchange area and increases the drying rate; the third is the inclined lifting plate area, where the wet manganese slag has been in a low-moisture and loose state, and the manganese slag has no adhesion phenomenon in this area. After the heat exchange, the manganese slag reaches the required moisture state and enters the discharging area; the fourth is the discharging area, where the drum is not equipped with a copy plate, and the manganese slag rolls and slides to the discharge port in this area to complete the entire drying process.

     Dingli Group is mainly engaged in various dehydration and drying equipment, which is suitable for various heavy and light materials. Interested customers are welcome to leave a message for consultation.