Whatsapp: +86 153-3371-8778

INTRODUCTION

     Environmentally-friendly drum continuous carboniation machine uses the carbonized flue gas purification into combustible gas generated in combustion itself. it can continuous product 24 hours. It has an advantages of zero pollution, zero emission, save labor, high capacity, energy-saving consumption, the high degree of automation and advanced technology. Which is suitable for large-scale production, with high carbonation rate, high carbon production rate, energy saving, environmental protection, high efficiency advantages.

    This charcoal carbonization furnace is suitable for all kinds of agricultural and forestry biomass charring making. For example, wood shavings, sawdust, wood chip, rice husk, cotton stalk, Bean stalk, bamboo,biomass waste,etc.

Biomass Continuous Carbonization Machine
Biomass Continuous Carbonization Machine
Biomass Continuous Carbonization Machine

PRINCIPLE

Whatsapp: +86 153-3371-8778

    Biomass continuous drum carbonization machine is a professional equipment for continuous high-temperature heating and carbonization of biomass under the condition of no oxygen and poor oxygen. It is composed of two-layer carbonization machine, preheat wood powder burner (or gasifier, natural gas burner), combustible gas purification device, external heating furnace of carbonization machine, feeding conveyor, cooling and carbon discharging machine and control, etc In this paper. The biomass is transported into the inner drum by the conveyor. The waste heat in the furnace is used to dry and preheat the materials to 200-250 ℃. The outer drum is provided with a combustible gas recovery pipeline at the end. The combustible gases such as carbon monoxide, methane and ethane produced in the carbonization process are fully utilized to separate wood tar, wood acid solution, water and ash through the flue gas purification system The pure combustible gas is sent to the heating furnace outside the carbonization machine for full combustion and heating to the carbonization machine to achieve reciprocating cycle heating and continuous production. The carbonization temperature is generally controlled at / 700-800 ℃. The carbonized products are discharged from the carbonization machine through water cooling, and the carbonization ignition is supplied by the pre heating wood powder burner (or gasifier or natural gas burner).

PARAMETERS

Model Inner Layer Diameter(mm) Outer Layer Diameter(mm) Drum Length(m) Cabon Capacity(kg/h) Dimension(m)
DLTJ1410/2 800 1400 10 300-500

10*2.1*2.8

DLTJ1610/2 1000 1600 10 600-800

10*2.3*3.0

DLTJ1810/2 1200 1800 10 700-1000

10*2.6*3.2

DLTJ2010/2 1400 2000 10 1100-1300

10*2.9*3.9

DLTJ2312/2 1600 2300 12 1500-2000

12*3.2*4.2

DLTJ2512/2 1800 2500 12 2200-2500

12*3.5*4.5

DLTJ2912/2 2200 2900 12 2500-3000

12*3.9*4.9

DLTJ3212/2 2500 3200 12 3200-3800

12*4.2*5.3

DLTJ3612/2 2900 3600 12 4000-4500

12*4.6*5.8

LEAVE US A MESSAGE.

we will give you customized Proposal & Quotation within 24 hour

LEAVE US A MESSAGE

Welcome to discuss your project requirements, We will give you customized Proposal & Quotation within 24 hours.