How to dry wet sawdust quickly? A large amount of wet sawdust can be processed by using Dingli sawdust dryer equipment. This processing method is one of the better drying methods for wet sawdust. After a large amount of sawdust is dried, it can be made into biomass pellet fuel and reused by molding equipment.
The processing route of Dingli sawdust drying and forming production line adopts a mixing process of primary drying, secondary crushing, continuous feeding and regulated feeding. The molding rate of pelletized fuel reaches over 98%, and the bulk density, particle density and calorific value are high . It can achieve large-scale, continuous and stable production to meet the needs of biomass pellet fuel industrialization. The equipment adopts high temperature hot air drying, and the wet sawdust is fed into the drum by the conveyor to achieve downstream drying. The sawdust is continuously picked up under the inner layer of the copy board, and scattered in a spiral travel forward, passing through the inner, middle and outer layers realize the heat exchange between sawdust and hot air, and quickly dry the sawdust.
The better drying method of wet sawdust can be handled by Dingli dryer. Currently Zhengzhou Dingli has launched a variety of models of sawdust dryer equipment, which has large processing capacity and good material drying effect, which can meet the needs of drying wet sawdust in different regions.