Parameters

CUSTOMIZE NOW
Model Capacity(t/d) Initial Moisture(%) Final Moisture(%) Drying Temperature(℃) Total Power(kw) Cover Area (m²)
DLSG2010/3 62.5 60±5 12-15% (Adjustable) 250±30℃ 78 8m×18m
DLSG2210/3 70.5 85 8m×18m
DLSG2510/3 83.5 110 10m×18m
DLSG2512/3 108.0 125 10m×22m
DLSG2912/3 120.0 135 10m×25m
Leave Us A Message We will contact you as soon as possible

    High humidity materials forming experts Zhengzhou Dingli company according to the market demand, company targeted development of material pellet fuel production line equipment.According to the material of characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass materials, our company optimizes the drying technology. Recommended products: three-layer rotary drum dryer, patent number: ZL2009 2 0089749.2. This equipment is a large processing line. This dryer has high efficiency, energy saving, and small floor space. Compared with other dryer machines, it saves energy by 30%-50%, thus maximum saving energy and drying cost.

Configuration

CUSTOMIZE NOW

    The crushed materials of which the moisture is about 35%-65% are sent into the roller by conveyor to realize downstream drying. Under the effect of the inner shoveling plate, materials are taken and scattered constantly, and move in the spiral forward method. Through three layers (inner, middle and outer layer), heat exchange is realized between material and hot air medium.

Working Principle:

    The material enters the inner layer of the rotary drum from the feeding device to achieve downstream drying. The material is continuously picked up and scattered under the inner layer of the copy plate to achieve heat exchange in a spiral manner. The material moves to the other end of the inner layer and enters the middle layer. During counter-current drying, the material is continuously raised in the middle layer, showing a two-step forward and one-step travel mode. The material in the middle layer not only fully absorbs the heat emitted by the inner drum, but also absorbs the heat of the middle drum, and at the same time prolongs the drying. Time, the material reaches a dry state here. The material travels to the other end of the middle layer and falls into the outer layer. The material travels in the outer drum in a rectangular multi-loop manner. The material that achieves the drying effect quickly travels out of the drum under the action of hot air. The wet material that does not achieve the drying effect cannot be fast due to its own weight. As it progresses, the material is fully dried in this rectangular copy board, thus accomplishing the drying purpose.

HOT PRODUCTS
Straw Drying Production Line

Straw Drying Production Line

Biomass Pellet Production Line

Biomass Pellet Production Line

Wood Chips Dryer Production Line

Wood Chips Dryer Production Line

RALETED CACES

MORE

COMPANY NEWS

MORE

LEAVE US A MESSAGE

If you want to know the lowest price of equipment, production plan, etc., please leave us a message or contact us via WhatsApp/Wechat:+86 15670626070