Sawdust dryer is a special equipment for drying sawdust. There will be some problems in the use of any equipment. If there is an unsolvable fault, we suggest you contact the company for maintenance. If you don't want to delay the production schedule or have some minor problems and want to repair by yourself, then we will give some common solutions to the problems.

  Belt slack:

  After sawdust dryer is used for a period of time, there will be slack belt, off, or broken phenomenon.

  Solutions:

  The solution to this problem is to check whether the switch contacts are good, whether the fuse is blown out, whether the click position is correct, and to replace the belt, this problem can be solved.

  The noise suddenly gets louder:

  In the use of the sawdust dryer, sometimes the noise suddenly increased.

  Solutions:

  There are many reasons for the increase of noise, which need to be checked from multiple aspects. The first thing to check is whether the position is balanced. Secondly, check whether the bearing is short of oil or damaged; Check again whether the fixing bolts of the bearing seat are loose.

  Brake failure:

  In the process of using wood chips dryer, sometimes brake failure occurs.

  Solutions:

  Brake failure is usually caused by excessive wear of the brake, to solve this problem only need to replace the brake can be.