Parameters Technical Data

For more personalized customized services, please consult in detail

Click To Customize
Model Capacity(t/d) Initial Moisture(%) Final Moisture(%) Power(kw) Area(m²)
DLJG1408 31 60±5% 12-15%(can be adjusted) 40 5×14m
DLJG1610 45 55 6×16m
DLJG2010 87.5 95 8×16m
DLJG2010/3 104 100 8×16m
DLJG2210/3 122 125 10×16m
DLJG2510/3 150 145 10×18m
DLJG2512/3 181 165 10×20m

Introduction

    Cow dung dryer is a new type of rotary dryer professionally designed and developed by Dingli Company according to market demand. This new dryer is suitable for cow dung, chicken manure, poultry manure, sawdust, wood flour, wood chips, wood shavings, Barley straw, oat straw, wheat straw, rye straw, rice straw, broom corn straw, peanut vine, corn straw and other materials.  According to the different characteristics of each raw material, different production capacity, application requirements, cost control, degree of automation, optimization of drying process technology, on-site working conditions, etc., we can design the drying process.

    Dingli Company recommended product: this cow dung rotary drum dryer unit capacity is larger, high efficient, saving energy, covers area is less, it can saving energy more than 50% than the ordinary dryer, it can maximize saving energy and drying costs.

 

Heat Source Form

  • (1)Steam Drying Equipment
  • (2)Gas Drying Equipment
  • (3)Fuel Drying Equipment
  • (4)Coal-fired Drying Equipment
  • (5)Biomass Boiling Furnace

Configuration

    Material Flow: 75-85% moisture content of the material fed into the special dehydration machine, the water removed to about 65% through the screw conveyor into the mixing drum dryer to downstream drying. Flights pick up material, carry it over, and shower it through the air stream as the drum rotates, promoting maximize the efficiency of heat transfer between the material and drying air. The rapid evaporation of water vaporization, to achieve the effect of drying materials in the hot air under the rapid flow of the drum. The rotary drum dryer gives the material a chance to dry before it hits the next flights, in order to prevent buildup near the wet material discharge. Drum cleaning device is installed inside of the drum to prevent the material sticking issue.

    Air Flow: the air through the air blower increase pressure into the hot air furnace to heating, when the temperature reached to 600-850℃, the hot air will be into the dryer to drying wet material and evaporation water by inducing draft fan. Through three-layer heat transfer, the air temperature reduces to 55-65℃ and then discharge from the dryer. The dust and moisture are purified trough the cyclone dust collector and wet dust collector.

To learn more, please feel free to contact us!

Products
Biomass Dryers
Feed Dryers
Organic Fertilizer
Coconut Coir Dryers
Coal Slime Dryer
Carbonization
Other Dryers

Company News

Online Message