Bearings play a pivotal role in the drying production line. When the lees dryer and other equipment are running, the bearings will heat up. Is this normal? Bearing overheating may be caused by abnormal equipment, which needs attention.
The operation of the equipment will cause a certain amount of friction, and will also cause the bearing to heat up, but if the bearing is overheated, it should be dealt with in time. The first is to check whether the position of the bearing and the conveyed material is the same as the position of the field. If the bearing changes, the bearing pressure will increase, resulting in serious consequences of the bearing being twisted. The second step is to check the lubricating degree of the bearing of the lees drying equipment. If the lubricating oil is not used for a long time, the pressure on the bearing will be too large and the bearing will become hot. The third is to regularly check whether there are impurities on the surface of the lees dryer bearing and then deal with it in time. The fourth is that errors will also occur during the assembly of the bearing, so the problem of bearing installation should be ruled out. After discovery, it needs technical personnel to deal with it in time.
The bearing problem of the lees dryer seems to be a small problem, but it is not the case. I hope that the maintenance personnel of the enterprise can pay attention to it.