Wood shavings and wood chips have many uses as our common materials. Shavings can be made into a variety of materials for sale after drying and processing, without causing waste of materials. How the wood shaving dryer works, I will briefly introduce it to you below.
The material enters the inner layer of the rotary drum from the feeding device to achieve co-current drying. The material is continuously picked up under the inner board and scattered in a spiral travel to achieve heat exchange. The material moves to the other end of the inner layer and enters the middle layer. Counter-current drying, the material is continuously lifted repeatedly in the middle layer, showing a two-step and one-step traveling mode. The material in the middle layer not only fully absorbs the heat emitted by the inner drum, but also absorbs the heat of the middle drum, and at the same time prolongs the drying time, the material reaches the ideal dry state here. The material travels to the other end of the middle layer and falls into the outer layer. The material travels in a rectangular multi-loop mode in the outer drum. The material that achieves the drying effect quickly travels out of the drum under the action of hot air. On the way, the materials are fully dried in this rectangular copy board, thus completing the purpose of drying.
As a professional shaving dryer manufacturer, Zhengzhou Dingli can provide you with one-to-one solutions and create exclusive equipment for you to meet your special requirements. Customers are welcome to come to our company to purchase.