Soymilk has become an indispensable drink in our daily life because of its high nutritional value. Most people will throw away the bean dregs left by the soya-bean milk machine. As everyone knows, the nutrients in the residual bean dregs are also very high, and the utilization value is higher. However, bean dregs is a water-oily material, and moisture is not easily disposed of. Therefore, Zhengzhou Dingli developed a bean dreg dryer for the characteristics of bean dregs.
Due to the large moisture of bean dregs, in general, 5 tons of wet bean dregs can produce one ton of dry bean dregs. Most manufacturers will adopt natural air drying methods, but this method is greatly affected by weather and other factors, and in summer, high temperature conditions It is easy to deteriorate under this time. At this time, it must be dried. On the one hand, it is conducive to preservation, on the other hand, it is convenient to transport.
The bean dregs dryer has the advantages of large production capacity, continuous production, convenient operation, excellent structure, low maintenance cost, good uniformity of product drying, and no odor after drying, and can handle various materials.
The bean dregs dryer is mainly composed of a heat supply source (hot air furnace or gas generator), a feeder (distribution machine), a rotary drying drum, a discharge machine, an induced draft fan, a transmission device, a discharge device and a power distribution cabinet; The whole drying system adopts electric centralized control, the hot air temperature is automatically adjusted, the degree of automation is high, and the operation is convenient. The use of a novel and unique sealing device, coupled with a good insulation system, effectively reduces the coal consumption of the drying system. After a certain amount of dehydrated wet bean dregs is dispersed, the feeder enters the drying drum. Under the drum, the uniformly spread plate lifting plate is uniformly dispersed in the drying zone and fully contacted with hot air to accelerate the drying. Dry heat transfer and mass transfer; moisture is extracted by the air intake device to prevent the material from returning to moisture. The main features of the bean dregs dryer: The structure is excellent and simple, and the material runs smoothly through the resistance of the cylinder and is easy to operate. The uniformity of product drying is good. Less failure, low maintenance costs, and low power consumption.