Sawdust dryer is a special equipment specially designed for the drying of wood chips, sawdust, wood powder, wood chips and other materials. It has the characteristics of large drying output, remarkable energy saving results and low maintenance. So what are the advantages of wood chips dryer?

  Compared with the single-barrel dryer of the same specification, the wood chip dryer has a thermal efficiency of 40-55%, saving more than double the energy consumption. Due to the special structure of the multi-layer sleeve type tumble dryer, the length of the cylinder is one-third of that of the single-cylinder dryer, and the basic area is about 65% lower than that of the single-cylinder dryer,the basic investment is correspondingly reduced.

  1. It can adapt to the diversity of wood chip materials, can adapt to the wood chips of almost all tree species, and is specially designed to remove the internal biological moisture of wood chips. It can adapt to the initial moisture of 20%-80%, and the final moisture is 2%-40%. The sudden change of moisture always keeps the discharge moisture constant, and can be easily adjusted according to the needs. It can adapt to the size of wood chip material and the length is less than 20mm and the diameter is less than 5mm.
  2. The self-insulation effect of the traditional three-channel (three-return) wood chip dryer is retained, and the energy lost through the cylinder is only 3%.
  3. There are no special requirements for the natural conditions of the installation site, including the average temperature and average relative humidity of the installation site, and the floor space can be saved by 15% compared with the traditional three-channel (three-pass) wood chip dryer.
  4. Large production capacity, dehydration can reach 6000KG / h, the output can be selected from 1T / h - 15T / h, the residual moisture of the product can be dried to less than 2%, the discharge water is very uniform, the water content error is less than 1 %, which is unmatched by traditional wood chip drying equipment.
  5. The operation is simple, all important parameters are visualized, at a glance, without too much operational experience.
  6. Strengthen the thermodynamic structure of the equipment, optimize the mechanical structure, use self-adjusting drive spindle, flexible control technology, multi-drive transmission torque and other new technologies to make the mechanical structure of the equipment more durable, more reliable and more convenient to overhaul.
  7. The equipment design is fully considered to have an impact on the environment. The equipment has small vibration and low noise, and the gas discharge is convenient to access the gas purification system.
  8. Fully consider the safety performance of the equipment, card jam alarm, high temperature alarm, fire early warning and other systems are sound, explosion-proof fire prevention measures are all. If you need to install the Mars detection and extinguishing device, you can also easily access it from the reserved interface of the device.
  9. The wood chip dryer is suitable for a wide range of industries, such as biomass pellet fuel, particle board, MDF, wood plastic, mechanical charcoal, and edible fungi cultivation.
  The above are the advantages of the wood chips dryer, which has a high drying effect on the drying material, and can achieve energy-saving and environmentally-friendly drying, while drying the material range is wide, the operation is simple, and it is worthy of the choice of the majority of users. If you are choosing a wood chip dryer, you can consider Zhengzhou Dingli. We are a professional dryer manufacturer with more than ten years of experience and our products are exported to many countries and regions. You can tell us the needs of the equipment, and the technicians will develop a one-to-one solution for you.For more details,please contact us.