When using cassava dregs drying equipment, the choice of equipment is very important, but safety is more important. Therefore, the inspection work before the use of cassava dregs dryer must be in place. This will not only guarantee the safety of the entire production, while avoiding the following details to cause the inefficiency of the entire drying process, the following introduces some details of the inspection work.
First of all, check all parts, check all the auxiliary equipment, including the various transmission parts of the dryer, the support and drag parts, etc., should be fastened, whether they are normal, etc. In addition, the contact with the belt, the blocking wheel and the supporting wheel should be slightly contact. Check the sealing condition (the discharge manhole door is closed, the seal is good, the feed seal is worn, the discharge air lock valve is mobile, and the air lock is better), etc. This production line should check whether the feeding device, combustion chamber, slag in the furnace, furnace door, air duct, regulating valve and blower, dust collector and other accessories are intact, and whether the connection with the upper and lower processes is normal, etc., and the fuel inspection, prepare the raw materials, and check the hot blast stove to ensure that the entire production line can run.
Cassava dregs dryer is mainly used for drying cassava dregs and other materials. Due to the different output of the company, the models of Dingli cassava residue dryers are different. The preliminary inspection of these cassava dregs dryers plays an important role in normal use in the future. I believe that through the above explanation, you should know how to inspect it.