During the operation of the sawdust dryer, the operating parameters such as the quantity of drying medium, temperature, humidity and circulation of the exhaust gas are independently controlled to ensure the reliability of the working of the dryer and the optimization of the operating conditions. The operation of Zhengzhou Dingli Sawdust Dryer Flexible, wet material feeding, drying process in a completely sealed environment, and good labor conditions are widely promoted and used.

  The new wood chip dryer is easy to operate, high in production efficiency, and its installation process is not complicated. According to the scheme provided by Zhengzhou Dingli, it will be more convenient and quicker.

  First of all, the wood chip dryer should be installed according to the drawings. The pipe should be equipped with fire-proof asbestos cloth. The interface screws should be tightened, and the air should not be leaked. The motor should keep a line with the exhaust fan. The sawdust triangle should be tight. The voltage is ready for drying after installation. Secondly, the furnace at the front of the dryer should be balanced. After the furnace door is opened, the burning materials, such as coal and firewood, can be placed. After ignition, the dryer power can be turned on. After the dryer is running normally, it can be placed. The raw materials to be dried are fed while being continuously dried, and the discharge port can be used for receiving the raw woven bag. If the dried raw materials do not reach the required drying effect, the drying can be repeated.