The cassava slag dryer will be affected by some external factors during the work process. For example, the local temperature and humidity will have different effects on the drying effect of cassava slag. Therefore, when purchasing the equipment, the user should inform the manufacturer of the cassava slag dryer to the location of the installation site, so that the technicians of the manufacturer can appropriately adjust the cassava slag dryer equipment according to the actual situation of the user, which is very important for the drying effect of the dryer.
The installation location of the cassava slag drying equipment in the south or the north, in the coastal area or in the interior involves the insulation temperature of the equipment, and the cassava slag dryer equipment installed outside should pay attention to the local meteorological conditions. The annual average humidity is also the basic parameter of the material and heat balance of the cassava slag drying equipment. For example, when the water evaporation is the same, when air with a high moisture content is used as a carrier, the consumption of air increases and the heat consumption increases.
In addition to the above, wastewater treatment is also a factor to be considered, and some dryer exhaust gases need to be treated with a wet scrubber. In the process of using the wet dust collector, waste water containing a large amount of dust will be generated, so the treatment measures of these waste water should also be taken into account when installing the cassava dregulator equipment.