Slime drying machinery equipment is used in coal washing plant drying slime equipment, the current market of slime dryer specifications and models are numerous, in order to let you know more about its working mode, today small make up for you to briefly introduce the working process of slime drying equipment.
At present, the project is more applied is dingli coal slime dryer
, dingli coal slime dryer is mainly composed of heat source, feeding device, belt feeder, rotary drum, belt discharge machine, fan, dust remover and distribution cabinet.The working principle of this set of equipment is as follows: due to certain viscosity of coal slime, wet coal slime is divided into the following several working areas after it enters the drying drum: first, the wet coal slime enters this area and rapidly evaporates water in contact with high temperature and hot air. The coal slime is moved under the guide plate with a large guide Angle, and is then transferred into the next working area if it cannot be bonded.2 it is to grab the cleaning area, wet material in this area is copy board copy forming curtain material status, the slime falling easily formed when binding phenomenon, cylinder wall cleaning device is designed in this area due to the equipment, cleaning device was reasonably clean the slurry, the wall adhesion in the process, cleaning device for caking coal slime ball ball also plays a role of broken, thus increasing the heat exchange area, improve the drying rate;The wet coal slime in this area has shown a low moisture loose state, and the coal slime in this area has no bonding phenomenon. After full heat exchange, the coal slime reaches the required moisture state and enters the discharge area.Four is the discharge area, the drum in this area is not set up to copy the board, slime in this area rolling sliding to discharge mouth, complete the whole drying process.