Pellet materials include sawdust, branches, straw, rice husks and peanut shell etc. The diameter of pellets is between 6mm and 12mm, the density is between 1.1t/m3 and 1.3t/m3, the moisture is 8% and below.

Small mobile biomass pellet plant is special pelleting equipment designed by our company. It has PLC start-up by order, double time control shaking sieve, and two operation modes including the manual and the automatic.
 
Material range:
saw dust, peanut shell, crop straw, rice straw, rice husks, sunflower shell, cotton stalk, bamboo, palm shell and so on.

Different materials are grinded by grinders into suited size. Next, the materials are put into the stock bins, and are transported by screw elevators into pelleting machines. Then, the materials are compressed by the pelleting machines into the pellets, and the pellets are put into cooling shaking sieves. After screening and cooling, the pellets can be packed and sold. Besides, the dust made in this system is absorbed in bag-type dusters.

Requirement of materials：

The diameters of materials are not over 50mm. If your materials of diameters are too big, you can tell us, and we will provide other grinders for you.

The moisture of materials should be between 10% and 14%. If the moisture is too low, you need to add the moisture. If the moisture is too high, you need to drying them.

There are kinds of materials you can use, including sawdust, crop straw, rice straw, rice husks, sunflower shell, cotton stalk, bamboo and palm shell etc.

Pelleting machine can feed food with the different frequency, which made the speed under the control, and keep the work stable.

The screw elevator is equipped with a frequency changer. By doing it, pelleting machine has the enough materials, and the box doesn’t have too much materials.