Powder Bagging MachineInstallation:

1- The Powder Bagging machine should be fixed on the foundation without strong vibration, the power supply should be 380 Volts (3 phase), 50HZ.

The top feed inlet center should aligning to the top hopper center.

Y Type single nozzle top feed inlet size please refer to Picture 3,

Y Type single nozzle top feed inlet size please refer to Picture 4.

Adjustment Methods: Loosen the screw of the spring (6), adjust the top and bottom position, move the bag packing frame (2) to make the center line of the powder outlet mouth and the powder outlet base aligning, and reduce the powder discharging resistance. Move the hanging ASSY front and rear to make the distance between powder outlet mouth and powder outlet pipe to be 40-50mm. Adjust the beam(7) position of the hanging ASSY (2), make the four pieces of spring horizontal and parallel. After adjustment, finally fix the screws well.